Skip to main content
All CollectionsPrintingAdvanced
Label printers on Cisco Networking
Label printers on Cisco Networking

The following information is for troubleshooting connecting label printers to networks using Cisco networking equipment.

Robert Sterling avatar
Written by Robert Sterling
Updated over a week ago

Add an mDNS service string for the Brother printer

  1. Access the Cisco Wireless LAN Controller and add an mDNS entry.

    On the controller select: mDNS > General > Service Name > Other > Add

  2. Use the and configure it as per below:

    Service Name:

    default-mdns-profile

    Service String:

    _pdl-datastream._tcp.local.

  3. Test printer can be discovered across networks.

Did this answer your question?