Skip to main content
Set up your Sanitiser Addon
Liz Harper avatar
Written by Liz Harper
Updated over a week ago

Included pieces

Step 1: Remove printer from bracket.

Step 2: Fix mount plate to printer bracket with 2x M5x8mm (D) and 2x M5 Nylocs (E) through holes in rear of printer bracket.

Step 3: Mount sanitiser bottle bracket to mount plate with 2x M5ร—6mm screws (C).

Step 4: Place hand sanitiser bottle into bracket and replace front cover.

Step 5: Lock the cover by inserting M3 thumbscrew (F) into right side. Finally, replace printer in position.

Did this answer your question?