Once you've received your Elite Desk Stand, you'll need to follow these steps to install your iPad into the stand.
This guide covers assembling the stand and then installing the iPad into the stand.
Unbox your Stand components, screws and tool(s) before continuing to the next step.
Place Elite Holder on Evo Stand and screw in the 4 screws.
Unlock the Elite Holder with keys, if there is a latch on your stand - slide the latch to remove Faceplate.
Install the four rubber cushions, one to each corner of the stand.
Feed Charging Cable through and plug in.
Place Faceplate back on and lock.
Your stand is now ready for visitors.
Optional: Change tablet rotation
Place case on the pole in desired rotation and screw lock screw as shown to lock rotation.
Mounting with screws
If you want to screw-down the desk stand or your have Elite Adjustable Wall Mount version - which can be installed as a wall mount or a screwed down counter mount, follow these instructions to install your stand:
Mounting above/in front
Step 1
Lift the evo pole base cover from the bae plate & drill pilot holes.
Step 2
If running your cable through the surface, ensure to drill a larger hole for the cable to feed through.
Step 3
Screw down your Evo pole through the base plate using the wood screws provided and press down base cover.
Mounting below/behind
Step 1
Locate Evo pole and unscrew the three screws to remove the base plate and base cover. Set base aside.
Step 2
Drill pilot holes to assit with screw base mounting.
Step 3
If running cable through, ensure to drill a larger hole to feed cable.
Step 4
Screw down your Evo pole through mounting surface using the screws and washers provided.
That's it! See below for more support articles.