Step 1: Unlock case with keys provided and remove faceplate.

Optional Cable Cutout: Unscrew existing closed cable cutout and install the open cable cutout.

Step 2: Remove the VEGA plugs.

Step 3: Drill pilot holes to assist with screw base mounting.

OPTIONAL: If running charging cable through the wall, drill a large hole in the centre to feed cable through.

Step 4: Run the cable either: a) Through the wall. b) Through the optional cable cutout.

Step 5: Screw the case to the wall using the VESA holes.

Step 6: Plug in your tablet while placing it into the case.

Step 7: Place faceplate on and lock.